中国省际碳排放效率的空间计量

本文基于至强有效前沿的最小距离法测算了我国1998-2011年的省际CO2排放效率,这种方法的优点是效率达到生产前沿后在投入或产出方面所做出的改动最小。然后在此基础上分析了我国省际碳排放效率的区域差异性以及空间相关性,最后运用1998-2011年我国30个省份的面板数据,建立空间面板数据模型,对我国碳排放效率的影响因素进行了实证研究。研究结果表明:样本期内,我国省际碳排放效率表现出较大的省际差异性,东部沿海省份的平均碳排放效率显著高于内陆省份。分地区看,东部地区的碳排放效率走势相对平稳,全国及中西部地区的碳排放效率则呈现出"U"型曲线的走势,并且东部地区的碳排放效率明显要高于中西部地区;空间自相关Moran’s I检验显示,省际碳排放效率在空间上存在着显著的空间自相关性,具有明显的集群趋势,而空间LISA图则表明省际碳排放效率不仅具有空间依赖性的特征,同时也有空间异质性的表现;经济规模、工业结构和能源消费结构对碳排放效率造成了较大的负面影响,对外开放、企业所有制结构以及政府干预对碳排放效率有正向影响,而产业结构对碳排放效率的影响则不显著。因此,对于将来中国提高碳排放效率工作的重点应该是实现经济增长模式由粗放型向集约型的转变,着重调整工业结构和能源消费结构,同时进一步提升对外开放的质量,加强政府的碳减排工作力度。     

Energy consumption,emissions and economic growth in Bahrain

This study examines the Granger causality relationships between economic growth, energy consumption and emissions, from 1980 to 2007 in Bahrain, controlling for capital and urban population using Toda and Yamamoto’s approach. It was found that there is unilateral causality which runs from urban population, economic growth, capital and energy consumption to environment. Further, we found strong support for causality running from economic growth to energy consumption, emissions and capital. The existence of these linkages suggests that the government of Bahrain may pursue energy efficiency strategies and carbon emissions reduction policy in the long run without impeding economic growth. Additionally, the long run pursuit of high economic growth given sustained increases in energy efficiency may also reduce CO₂ emissions intensity per unit of her GDP.     

Energy and economic impacts of an international multi-regional carbon market

The establishment of a global multi-regional carbon market is considered to be a cost effective approach to facilitate global emission abatement and has been widely concerned.The ongoing planned linkage between the European Union’s carbon market and a new emission trading system in Australia in 2015 would be an important attempt to the practice of building up an international carbon market across different regions.To understand the abatement effect of such a global carbon market and to study its energy and economic impact on different market participants,this article adopts a global dynamic computable general equilibrium model with a detailed representation of the interactions between energy and economic systems.Our model includes 20 economic sectors and 19 regions,and describes in detail 17 energy technologies.Bundled with fossil fuel consumptions,the emission permits are considered to be essential inputs in each of the production and consumption activities in the economic system to simulate global carbon market policies.Carbon emission permits are endogenously set in the model,and can be traded between sectors and regions.Considering the current development of the global carbon market,this study takes 2020 as the study period.Four scenarios(reference scenario,independent carbon market scenario,Europe Union（EUh-Australia scenario,and China-EU-Australia scenario） are designed to evaluate the impact of the global carbon market involving China,the EU,and Australia.We find that the carbon price in the three countries varies a lot,from $32/tCO₂ in Australia,to $17.5/tCO₂ in the EU,and to $10/tCO₂ in China.Though the relative emission reduction（3%） in China is lower than that in the EU（9%） and Australia（18%）,the absolute emission reduction in China is far greater than that in the EU and Australia.When China is included in the carbon market,which already includes the EU and Australia,the prevailing global carbon price falls from $22 per ton carbon dioxide（CO₂） to $12/tCO₂,due to the relatively lower abatement cost in China.Seventy-one percent of the EU’s and eighty-one percent of Australia’s domestic reduction burden would be transferred to China,increasing 0.03%of the EU’s and 0.06%of Australia’s welfare.The emission constraint improves the energy efficiency of China’s industry sector by 1.4%,reduces coal consumption by3.3%,and increases clean energy by 3.5%.     

Research on whole life cycle carbon emission model of typical buildings

Based on the theory of life cycle assessment (LCA), this article analyzes the influence factors on carbon emissions from residential buildings. In the article, the life cycle of residential buildings has been divided into five stages: building materials production period, construction period, operation and maintenance period, demolition period, and solid waste recycle and disposal period. Based on this definition, the authors provide a theoretical model to calculate carbon emissions of residential building life cycle. In particular, the factor of human activities was introduced in the calculation of carbon emissions from the buildings. Furthermore, the authors put forward a model for calculation with the unit of carbon emissions for per-capita living space.     

污水生物处理实际工艺中氧化亚氮的释放：现状与挑战

介绍了污水生物处理过程中N2O的产生途径,重点分析了污水厂典型脱氮工艺的N2O释放差异及其原因,提出了城市污水脱氮处理过程N2O减排的具体措施,并估算出全国城镇污水处理厂2011年N2O释放总量约为1.26×109g(以N计),对今后关于城市污水脱氮处理过程N2O产生及减排的研究趋势进行了评估.     

基于协调度函数的碳排放初始权区域分配模型研究

针对目前碳排放初始权区域分配模型中分配原则、指标体系不一致的问题,提出了碳排放初始权区域分配协调度概念,并确定了公平性原则、效率性原则、可持续发展原则、保障工业生产原则、保护环境原则作为碳排放初始权区域分配的具体原则,构造了基于各个分配原则下的碳排放初始权区域分配协调度子函数,建立了以碳排放初始权分配系统协调度最大为目标的协调度分配模型。将此模型应用到华东电网区域的碳排放初始权分配中,结果表明该模型合理、有效、可行性高,能较好的兼顾各个分配原则。该区域分配模型不依赖分配指标体系,能有效避免分配指标体系混乱问题,所建立的模型可以为碳排放初始权区域分配的研究提供借鉴。     

浙江省碳排放与经济增长的脱钩关系及驱动因素研究

运用IPCC参考方法、Tapio脱钩模型、协整分析和Granger因果检验,研究了浙江碳排放特征及其驱动因素.结果表明:碳排放量呈增长趋势,碳排放强度呈下降趋势,多数年份碳排放与经济增长之间呈"弱脱钩"状态;经济增长、外贸和人口增长对碳排放正向驱动,能源效率和城市化对碳排放负向驱动;经济增长、外贸、城市化和人口增长是引起碳排放增长的单向Granger原因,能源效率与碳排放互为Granger原因.     

基于两种样品前处理方法对比研究小冬克玛底冰川雪坑中痕量元素

通过对唐古拉山小冬克玛底冰川雪坑中非季风季节沉积的雪样分别进行酸化处理和消解处理后,利用高分辨扇形磁场等离子体质谱仪(ICP-SFMS)测试了样品中19种痕量元素(Ba、U、Sr、Rb、Tl、Mo、Cs、Pb、Sb、V、Cr、Mn、Fe、Co、Al、Cu、Ti、Li、As)的酸化浓度和总浓度.研究结果表明,痕量元素浓度的变化范围较大,元素Al的最大/最小浓度比为326(酸化浓度)和465(总浓度),元素Pb相应比值为27和48.雪冰中痕量元素的总浓度一般大于该元素的酸化浓度,其中,元素Pb、Fe、Sb、Ba、Al、Ti的酸化浓度占总浓度的平均比值分别为91%、76%、60%、52%、33%和21%.一般地,样品中不溶微粒含量越大,酸化浓度占总浓度的比值越小;不溶微粒含量越小,则相反.对痕量元素的富集系数(EF)分析表明,各元素总浓度EF均值小于酸化浓度EF均值,揭示了用酸化浓度计算EF存在对痕量元素人为来源影响的高估.人类排放是小冬克玛底冰川中痕量元素的来源之一,对于元素Mo和Sb,人类排放估计是主要来源.利用后向轨迹模型模拟出小冬克玛底冰川雪冰中痕量元素在非季风季节主要来源于青藏高原西部及中亚中东地区.     

基于LCA的北京市公交车节能及温室气体减排潜力分析

新能源公交车是未来城市公交行业节能及温室气体减排的重点发展方向.新能源公交车在行驶阶段具有良好的节能及温室气体减排效果,而汽车制造、能源生产等相关生命周期阶段的能耗及温室气体排放常被忽视,且目前新能源公交车的乘客运载功能相对较弱,可能对节能及温室气体减排的潜力造成较为显著的影响.因此,本文基于北京市公交车的运营特征,采用生命周期评价(LCA)方法,选择客运周转量作为功能单位,核算了天然气公交车、混合动力公交车和纯电动公交车等新能源公交车相对于柴油公交车的节能及温室气体减排效益.结果表明:发展新能源公交车对促进北京市公交行业及城市节能低碳发展具有积极的作用,但相对于基于运营里程的核算结果,本研究新能源公交车节能及温室气体减排潜力均较低,主要原因是新能源公交车的实际载客量相对较低;混合动力公交车和纯电动公交车在空调开启时的节能潜力与温室气体减排潜力均远低于天然气公交车;通过发展情景分析,建议北京市现阶段应优先发展天然气公交车,适当发展纯电动公交车和混合动力公交车,以减少北京市公交车的总体能耗,同时降低温室气体排放强度.     

制备条件对低温NH_3-SCR脱硝催化剂Mn-Ce/TiO_2结构与性能的影响

采用溶胶凝胶法制备了Mn-Ce/TiO2催化剂,以NH3为还原剂,通过程序升温反应考察其选择性催化还原NO的催化性能.同时,着重探讨了焙烧温度、焙烧时间、活性物质负载量及Mn、Ce负载比例对催化剂结构和性能的影响,并用BET、XRD等对催化剂进行了表征.结果表明,活性组分负载量由0增至20%时,NO转化率随着负载量的增加而提高,当(Mn+Ce)质量分数为20%,催化剂活性最高,此后随着活性组分负载量的增加,NO转化率明显下降;Mn与Ce的负载比例为0.85∶0.15时,催化剂比表面积最大,为112.31m2·g-1;焙烧温度500℃时催化剂晶相均为TiO2锐钛矿型结构,焙烧温度升高至600℃,催化剂晶相为TiO2锐钛矿型和金红石型混合结构,且催化剂比表面积急剧减小;焙烧时间对催化剂晶相结构影响不大,焙烧时间为5h时,Mn-Ce/TiO2的脱硝性能最好.